lAvArt MCP for Revit. An assistant that works in the model, on your terms.
An MCP server and a Revit add-in that let Claude and other AI assistants work inside the Revit model you have open. Ask it what is in the model for free. Let it change things only where you allow it, after a preview, and with an undo.
Create an account, then download the installer from your Revit MCP page. 14 days of Pro to try it, no card.
Revit 2025 and 2027 · Claude Desktop and Claude Code · runs on your own computer
See it work
A recording is on its way.
We are capturing the add-in at work in Revit, on a real model. The film goes here when it is done, and not before.
Demo video coming
What the recording will show
- 01A hand sketch or a PDF plan, handed to Claude
- 02Levels and grids proposed, and previewed in Revit before anything changes
- 03Applied in one step, then undone with one undo
Until then, the picture of the panel on this page is a drawing, and it says so.
Ready in minutes
Install, connect, ask.
One installer, one line to connect Claude, and you are asking questions of the model you have open.
- Step 01
Install the add-in
Run the installer with Revit closed. It installs for your Windows user, so it needs no admin rights, and covers Revit 2025 and 2027.
The beta build is unsigned. Windows may show a SmartScreen warning when you run the installer, and Revit asks once whether to load the add-in. Both are expected, and the install guide shows what to choose. Install guide
Next: connect Claude.
- Step 02
Connect Claude
Claude Desktop: tick Connect Claude Desktop in the installer. Claude Code: one line in PowerShell.
claude mcp add revit-pro -- "$env:LOCALAPPDATA\Programs\Lavart\RevitMcp\server\revit-mcp.exe"Connect guide, including other assistants.
Next: open a model and ask.
- Step 03
Ask your model
Open a model in Revit. The lAvArt tab shows the lAvArt MCP panel, and every document starts Read only. Then ask:
“What is open in Revit?”
What it can do, tool by tool.
Editing is Pro: switch on Allow edits for the document first.
The whole route, with every prompt Windows and Revit show you, is in the guide.
Free and Pro
Looking is free. Changing is Pro.
The line between the two is the line between reading the model and writing to it. Nothing else is held back.
Free
£0 free account
Read the model.
Ask what is in the model you have open. The assistant can look, and cannot change anything.
- Elements, parameters, types, levels, views, sheets, schedules, warnings
- The current selection, and a capture of a view
- No licence key, and the add-in never asks you to sign in
- Nothing in the model is modified
Pro
£12 per seat a month
Let it edit, under your control.
Editing is the paid part, and it is built around consent: you switch it on per document, see each change first, and can take each one back.
- Set parameters and view graphics; create levels and grids
- Permission per document, set in the Revit ribbon
- A preview of what would change, before anything does
- One undo entry per change, and a journal to revert from
- One seat covers 2 computers
How the parts fit
Two parts, all on your machine.
MCP is the open protocol AI assistants use to reach tools. This gives them a tool for Revit: a small server the assistant talks to, and an add-in that does the work inside Revit itself.
- 01 · Your AI client
The assistant asks.
Claude, or another MCP client, decides it needs something from the model and calls a tool. You see the call in the conversation.
- 02 · A small local program
A local exe passes it on.
The client starts a small exe on your computer. It holds no model data and makes no decisions. It hands the call to Revit and hands the answer back.
- 03 · Inside Revit
The add-in does the work.
The add-in runs the call inside Revit, against the document you have open. The permission check, the preview, the undo and the log all live here, where a prompt cannot talk its way around them.
Safety
Write access you can account for.
Giving an assistant the keys to a live model is only reasonable if you can see what it will do, stop it, and prove what it did. These rules live in the add-in itself, where a prompt cannot talk its way around them.
Permission per document
Every document starts as Read only. You choose in the Revit ribbon whether the assistant may edit this one, and no tool can change that setting for itself.
Preview before apply
An edit is first returned as a preview: how many elements, and before and after values. If the model changes in between, the preview goes stale and has to be run again.
One undo entry per change
Each change the assistant makes is a single entry in Revit's own undo list, so Ctrl+Z takes back exactly that change and nothing else.
A revert journal
Changes are recorded so they can be reverted later, after the undo list has moved on. A revert only writes a value back if it is still the one the change wrote.
An audit log
Every call is logged with its time, the client, the tool and the outcome, and you can read it in Revit. When someone asks who changed the fire ratings, there is an answer.
A pause button
One click in the ribbon refuses every AI call until you resume. Useful before a deadline, or any time you would rather it kept its hands off.
The model file never leaves the machine.
There is no lAvArt server in the middle and no upload step. The add-in and its small server run on the computer that runs Revit. What the assistant does see is the answer to each question it asks, such as a list of doors and their ratings, and that goes to whichever AI service you have chosen to use, the same as anything else you type into it.
Pricing
Reading is free. Editing is per seat.
Reading the model costs nothing. Pro adds editing and is billed per seat, monthly or yearly, and you can cancel at any time. The beta is open to founding seats.
Free
Read-only. Needs a free account for the installer, no key.
For asking questions of a model. It stays free.
Get the installerPro
Betaper seat a month
$14 in US dollars
per seat a year
$140 in US dollars
- 14-day Pro trial, one seat, no card
- One seat covers 2 computers
- One licence key for the practice
- Change seats or cancel any time, in the billing portal
Create an account, then download the installer from your Revit MCP page. 14 days of Pro to try it, no card.
Founding seats: buy during the beta at these prices and the price stays locked for as long as the subscription stays active. The beta add-in does not check a licence yet; that arrives in an update, and your seat carries over. Not happy? Ask within 14 days and you are refunded.
Prices are in pounds, with US dollars beside them. You are charged in pounds unless the currency on your lAvArt account is another one, and then in US dollars. lAvArt is not VAT registered, so no VAT is added. Payment is taken by Stripe.
Questions
The ones worth asking first.
If yours is not here, write to us. A person answers.
Which versions of Revit does it work with?
Revit 2025 and 2027. The installer finds the versions you have and lets you tick the ones to add it to.
Which AI assistants can use it?
It is built for Claude Desktop and Claude Code first. It is a standard MCP server, so other MCP clients such as Cursor and VS Code can start it too. You bring your own account with the assistant; lAvArt does not resell AI usage.
Does my model leave my computer?
The Revit file is never uploaded, to lAvArt or anywhere else. The add-in and its server run on the computer that runs Revit and talk to each other locally. What the assistant receives is the answer to each question it asks, such as a list of doors and their fire ratings, and that goes to the AI service you chose, like anything else you type into it.
Can I undo what the assistant does?
Yes. Each change is one entry in Revit's own undo list, so Ctrl+Z takes back exactly that change. Changes are also written to a journal, so one can be reverted later, after the undo list has moved on. Nothing is written at all until you have allowed edits for that document and seen a preview.
What does it cost?
Reading the model is free, with a free account for the installer. Pro, which adds editing, is £12 ($14) per seat a month or £120 ($140) per seat a year. One seat covers 2 computers. Prices are in pounds, with US dollars beside them. You are charged in pounds unless the currency on your lAvArt account is another one, and then in US dollars. lAvArt is not VAT registered, so no VAT is added.
Is there a free trial?
Yes: 14 days of Pro on one seat, with no card. It starts the first time you open your Revit MCP page, and nothing is charged when it ends. Reading stays free either way, and the installer stays yours to download.
How do I cancel?
From your Revit MCP settings, open the billing portal and cancel there. It takes effect at the end of the period you have paid for, and nothing further is charged. The add-in then goes back to reading for free. There is no notice period and nobody to email.
When can I install it?
Now, as a public beta. Create an account and the installer is on your Revit MCP page, free to download with or without a trial. Expect rough edges; we fix what you report.
Is this an Autodesk product?
No. lAvArt MCP for Revit is an independent product made by lAvArt Studio in Leicester, UK. It is not affiliated with or endorsed by Autodesk.
Direction
Where this is going.
The aim is an assistant that can do real modelling work, not one that only answers questions. Nothing under Next or Later is shipped, and there are no dates, because dates get missed.
- Reading the model: elements, parameters, views, sheets, schedules
- The first edits: parameters, view graphics, levels and grids, and reverting them
- The installer. The licence check inside the add-in arrives in an update
- More editing tools, each behind the same preview and undo
- Deletes, confirmed in Revit before they happen
- Revit 2026
- An agent that models, not only edits: walls, floors, rooms
- MEP included: ducts, pipes and the runs between them
- Eventually, building a model from a PDF drawing
Ask your model something.
Tell us which Revit version you run and what you would hand to an assistant first: that decides the order we build in. Not sure it is for you yet? Read the guide first: it needs no account.
Autodesk and Revit are registered trademarks of Autodesk, Inc. lAvArt MCP for Revit is an independent product and is not affiliated with or endorsed by Autodesk.